Microwave dielectric properties of SrLa[Ga1−x(Mg0.5Ti0.5)x]O4 and SrLa[Ga1−x(Zn0.5Ti0.5)x]O4 (x = 0.2-0.8) ceramics

SrLa[Ga_1−x(R_0.5Ti_0.5)_x]O₄ (R = Mg, Zn) ceramics were prepared by a standard solid state sintering method. The single-phase ceramics with K₂NiF₄-type layered perovskite structure and I4/mmm space group were obtained, indicating that SrLa(R_0.5Ti_0.5) and SrLaGaO₄ can form the unlimited solid solutions. With increasing x for R = Mg and Zn, ε_r increases monotonously, the Qf value first increases and then decreases, while τ_f increases from a negative to a positive value. The optimized microwave dielectric properties were obtained as following: ε_r = 23.3, Qf = 89 400 GHz, τ_f = −0.8 ppm/°C for SrLa[Ga_0.6(Mg_0.5Ti_0.5)_0.4]O₄ and ε_r = 23.3, Qf = 76 200 GHz, τ_f = 0.2 ppm/°C for SrLa[Ga_0.7(Zn_0.5Ti_0.5)_0.3]O₄, indicating that the present solid solution ceramics are the promising candidates as microwave resonator materials for the telecommunication applications.     

分子筛脱水吸附塔的结构应力与疲劳分析

综合考虑分子筛脱水吸附塔的结构、疲劳状况及管口载荷等因素,利用ANSYS对吸附塔进行结构应力与疲劳分析。计算结果表明:所建立的吸附塔整体模型合理;该结构在确保可靠性的基础上可降低制造成本;该设备能满足疲劳寿命的要求。     

Design and Fabrication of Concentration‐Gradient Generators with Two and Three Inlets in Microfluidic Chips

A simple and low‐cost method for designing and fabricating concentration‐gradient generators with two and three inlets is proposed which can generate different concentration gradients at varying flow velocities. The microchannel structure was designed in S‐shape and left‐right symmetry. The concentration‐gradient generator was simulated based on the finite element method. The microchannels were processed on a computer numerical control (CNC) engraving and milling machine on poly(methylmethacrylate) substrate, and then two concentration‐gradient generators were fabricated by hot bonding technology. The results of experiment and simulation were compared to prove the feasibility of the method. Flow velocity was an important factor for generating different concentration gradients. The concentration‐gradient profiles of the generators with two and three inlets present approximately linear and quadratic curves.     

玻璃-陶瓷基支撑点对真空玻璃力学性能及热导的影响

近几年真空玻璃产业发展迅速,而支撑物作为真空腔体的支撑材料直接影响真空玻璃的透明度、受力、热导等性能.本文制备了一种弹性模量适中、热变形可调的玻璃-陶瓷基真空玻璃支撑点,研究了其制备工艺以及工艺对玻璃力学性能及热导的影响.结果 表明:制备的支撑物材料粉体粒径分布范围集中在0.5～10 μm之间,采用点胶工艺可制备高度在0.2～0.35 mm之间,直径在0.5～1.0 mm之间,尺寸可控的支撑点矩阵;支撑点在经过物理钢化后有晶体析出,为玻璃-陶瓷结构,提高了支撑点的强度;支撑点由“点接触”改为“面接触”可以有效避免支撑点的破碎和玻璃微裂纹的产生;适当调整支撑点的尺寸和间距可以在保证力学性能的基础上使玻璃同时具有低的热导.     

A distributed energy system integrating SOFC-MGT with mid-and-low temperature solar thermochemical hydrogen fuel production

Solar thermochemical hydrogen production with energy level upgraded from solar thermal to chemical energy shows great potential. By integrating mid-and-low temperature solar thermochemistry and solid oxide fuel cells, in this paper, a new distributed energy system combining power, cooling, and heating is proposed and analyzed from thermodynamic, energy and exergy viewpoints. Different from the high temperature solar thermochemistry (above 1073.15 K), the mid-and-low temperature solar thermochemistry utilizes concentrated solar thermal (473.15–573.15 K) to drive methanol decomposition reaction, reducing irreversible heat collection loss. The produced hydrogen-rich fuel is converted into power through solid oxide fuel cells and micro gas turbines successively, realizing the cascaded utilization of fuel and solar energy. Numerical simulation is conducted to investigate the system thermodynamic performances under design and off-design conditions. Promising results reveal that solar-to-hydrogen and net solar-to-electricity efficiencies reach 66.26% and 40.93%, respectively. With the solar thermochemical conversion and hydrogen-rich fuel cascade utilization, the system exergy and overall energy efficiencies reach 59.76% and 80.74%, respectively. This research may provide a pathway for efficient hydrogen-rich fuel production and power generation.     

基于特征融合的中文简历解析方法研究

针对基于规则和统计的传统中文简历解析方法效率低、成本高、泛化能力差的缺点，提出一种基于特征融合的中文简历解析方法，即级联Word2Vec生成的词向量和用BLSTM（Bidirectional Long Short-Term Memory）建模字序列生成的词向量，然后再结合BLSTM和CRF（Conditional Random Fields）对中文简历进行解析（BLSTM-CRF）。为了提高中文简历解析的效率，级联包含字序列信息的词向量和用Word2Vec生成的词向量，融合成一个新的词向量表示；再由BLSTM强大的学习能力融合词的上下文信息，输出所有可能标签序列的分值给CRF层；再由CRF引入标签之间约束关系求解最优序列。利用梯度下降算法训练神经网络，使用预先训练的词向量和Dropout优化神经网络，最终完成对中文简历的解析工作。实验结果表明，所提的特征融合方法优于传统的简历解析方法。     

Single-Crystalline TiO2(B) Nanobelts with Unusual Large Exposed {100} Facets and Enhanced Li-Storage Capacity

The {100} facet of single-crystalline TiO₂(B) is an ideal platform for inserting Li ions, but it is hard to be obtained due to its high surface energy. Here, the single-crystalline TiO₂(B) nanobelts from H₂Ti₃O₇ with nearly 70% {100} facets exposed are synthesized, which significantly enhances Li-storage capacity. The first-principle calculations demonstrate an ab in-plane 2D diffusion through the exposed {100} facets. As a consequence, the nanobelts can significantly accommodate Li ions in LiTiO₂ formula with specific capacity up to 335 mAh g⁻¹, which is in good agreement with the electrochemical characterizations. Coating with conductive and protective poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), the cut-off discharge voltage is as low as 0.5 V, leading to a capacity of 160.7 mAh g⁻¹ after 1500 cycles with a retention rate of 66% at 1C. This work provides a practical strategy to increase the Li-ion capacity and cycle stability by tailoring the crystal orientation and nanostructures.     

大采高综放工作面强动压端头顶板控制技术

为了解决大采高综放工作面回风侧端头顶板控制问题,针对马道头矿8211工作面的地质情况,通过对回风顺槽超前注浆加固,提高超前支护范围和支护强度,并对回风侧端头三角区煤壁和顶板进行化学浆加固的技术方案,有效控制了顺槽超前区围岩变形和工作面回风侧端头三角区煤壁片帮,保证了工作面端头区顶板安全。     

精密电解加工共性关键技术及其在航空制造中的应用

飞行器上关键结构件的几何特征复杂,传统方式难以满足加工需求,精密电解加工技术具有无工具损耗、无机械切削力、加工定域性好的优点,适用于各种形状复杂、难加工、低刚度构件的加工,在航空制造领域占有重要地位。在介绍精密电解加工共性关键技术的基础上,阐述了其在航空制造中的典型应用,并对发展前景进行了展望。